Industrial Furnace Accessories & Combustion Spares

Shear Blade	Tilted Laddle
Air Motorised Valve	Cooling Bed Casting
Roof Brick Anchor	Combustion Blower
Heating Pumping Unit	Flue Damper
Discharge Ejector	Gas Train
Sensitrol Micro Valve	Charging Pusher
Gas Motorised Valve	Air Oil Ratio Regulator
Blower	Oil Motorised Valve
Roof Anchor	Rotry Valve
Ignitin Electrode	Heating Element
Ignition Electrode	Heating Element of Muffle Fc
Burner Nozzles	Burner Nozzles
Ejector For 6MTR Billet	Gas Pressure Reducing system
Gas Train	Mechanical Ejector
Mechanical Pusher	Oil Mot Valve
Reheat Furnace	Spark Plug

Therm process Engineering Pvt. Ltd. manufactures and supplies the accessories that surround an industrial furnace. These cover material handling, combustion, fuel handling, flow control, heat recovery and refractory support. Because Therm process designs complete reheating and heat treatment furnaces, its accessories are built to work as part of a furnace system. They are available for new projects and as replacements for existing furnaces. Browse the range below, or send us your requirement.

Why Furnace Accessories Matter

A furnace is only as reliable as the equipment around it. A charging pusher that stalls stops the mill. A poorly regulated oil supply wastes fuel and destabilises the flame. A sticking flue damper upsets furnace pressure and increases heat loss. Many furnace problems trace back to accessories rather than the furnace body itself.

Buying accessories from a furnace designer means parts are specified with the whole system in mind.

Therm process Accessories Range

Material Handling

• Charging pusher Pushes billets into reheating furnaces in rolling mills. Coupled with an electro-mechanical drive or a hydraulic pusher, depending on furnace capacity. Designed for billet lengths of 1.5 to 12 m.
• Discharge ejector Pushes heated billets out of the furnace to the mill.
• Shear blade, cooling bed casting, tilted ladle.

Technical Specifications

Combustion & Fuel Handling

• Combustion blower. Supplies combustion air to burners.
• Heating pumping unit. Heats and pumps fuel oil to burners in reheating furnaces.
• Gas train. Controls and safety valves for gas-fired burners.
• Burner oil and air nozzles, ignition electrodes.

Flow & Ratio Control

• Air-oil ratio regulator. Controls furnace temperature by controlling oil flow through the burners. Suits LDO, HSD, LSHS and FO, at a maximum oil temperature of 120°C and a maximum oil inlet pressure of 1.75-2 kg/cm².
• Oil micro valve. Precise oil flow setting at burners (15-120 LPH).
• Limiting orifice valve. Sets gas or air flow at nozzle-mix burners.
• Air, gas and oil motorised valves.
• Rotary valve.
• DPT control system.

Draught & Heat Recovery

• Flue damper. Controls flue gas flow and furnace pressure.
• Recuperator / economizer. Preheats combustion air with waste heat.

Refractory & Heating

• Roof anchors and roof brick anchors. Support furnace roof refractory.
• Heating elements, including elements for muffle furnaces.

Steel Melt Shop Equipment

• Delta pre heater.
• Porous plug cleaning system.
• Ladle preheater.

Who Buys Furnace Accessories?

• Rolling mills replacing pushers, ejectors, dampers and oil systems.
• Furnace projects needing a complete auxiliary package.
• Heat treatment plants needing burners, valves and elements.
• Steel melt shops needing ladle and delta preheating and porous plug cleaning.

Benefits of Sourcing from Thermprocess

• System-matched parts from a furnace designer.
• One supplier for furnace, combustion and auxiliaries.
• Support with selection for replacements and upgrades.
• Manufactured in-house where applicable.

Why Choose Thermprocess?

• Established 1997, Mumbai.
• Furnace and combustion system manufacturer.
• ISO 9001 & ISO 14001 certified, as stated by the company.

Frequently Asked Questions

Q1. What accessories does Therm process supply for reheating furnaces?
Therm process supplies charging pushers, discharge ejectors, heating pumping units, combustion blowers, flue dampers, gas trains, ratio regulators, valves, burner nozzles, roof anchors and recuperators for reheating furnaces.
Q2. What drive does a Therm process charging pusher use??
Charging pushers are coupled with either an electro-mechanical drive or a hydraulic pusher, depending on the capacity of the furnace.
Q3. What does an air-oil ratio regulator do?
It controls furnace temperature by controlling oil flow through the burners in proportion to combustion air. The Therm process regulator suits LDO, HSD, LSHS and FO.
Q4. Can accessories be supplied for furnaces made by other manufacturers?
Share your existing equipment details and Therm process will advise on suitable replacement accessories.
Q5. What information is needed for a quotation?
Share the accessory required, furnace type and capacity, fuel, existing make or model, and drawings or dimensions of the part being replaced.

Need Furnace Accessories or Spares?

Send your list with furnace type, fuel and existing part details. Therm process will quote matched replacements or a complete auxiliary package.

Request a Quote